Wednesday, March 27, 2019
Samsung GT-N7000 , Samsung Note 1 Dead After Emmc Replace Done
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 Mhz
EMMC Device Information :
EMMC CID: 15010056545530304DF7C9994D5D400B
EMMC CSD: D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacture Name: SAMSUNG , EMMC NAME: VTU00M , EMMC NAME (HEX): 56545530304D , S/N: C9994D5D , rev. 0xF7
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 4/2013
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: VTU00M_C9994D5D_20190325_191054.extcsd
EMMC Init completed.
Operation: Write Dump
Writing to: ROM2 , start: 0x000000000000 , size: 0x000000080000
Input file: E:\Dump File\GT-N7000-JZO54K.N7000DXLSE\boot1.bin
eMMC switching to ROM2
Writing partition...
Done writing partition. Write speed: 1686.10 KB/s
All done time: [00:00:00:472]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 Mhz
EMMC Device Information :
EMMC CID: 15010056545530304DF7C9994D5D400B
EMMC CSD: D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacture Name: SAMSUNG , EMMC NAME: VTU00M , EMMC NAME (HEX): 56545530304D , S/N: C9994D5D , rev. 0xF7
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 4/2013
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: VTU00M_C9994D5D_20190325_191106.extcsd
EMMC Init completed.
Operation: Write Dump
Writing to: ROM3 , start: 0x000000000000 , size: 0x000000080000
Input file: E:\Dump File\GT-N7000-JZO54K.N7000DXLSE\boot2.bin
eMMC switching to ROM3
Writing partition...
Done writing partition. Write speed: 1698.70 KB/s
All done time: [00:00:00:473]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 Mhz
EMMC Device Information :
EMMC CID: 15010056545530304DF7C9994D5D400B
EMMC CSD: D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacture Name: SAMSUNG , EMMC NAME: VTU00M , EMMC NAME (HEX): 56545530304D , S/N: C9994D5D , rev. 0xF7
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 4/2013
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: VTU00M_C9994D5D_20190325_191122.extcsd
EMMC Init completed.
Operation: Write Dump
Writing to: ROM1 , start: 0x000000000000 , size: 0x0003AB400000
Input file: E:\Dump File\GT-N7000-JZO54K.N7000DXLSE\userarea.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 4853.46 KB/s
All done time: [00:52:50:898]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 Mhz
EMMC Device Information :
EMMC CID: 15010056545530304DF7C9994D5D400B
EMMC CSD: D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacture Name: SAMSUNG , EMMC NAME: VTU00M , EMMC NAME (HEX): 56545530304D , S/N: C9994D5D , rev. 0xF7
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 4/2013
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: VTU00M_C9994D5D_20190325_200417.extcsd
EMMC Init completed.
Scanning soft partitions
GPT header is found and is valid
Partition: EFS, [000000400000 - 000001800000], size: 000001400000
Partition: SBL1, [000001800000 - 000001940000], size: 000000140000
Partition: SBL2, [000001A00000 - 000001B40000], size: 000000140000
Partition: PARAM, [000001C00000 - 000002400000], size: 000000800000
Partition: KERNEL, [000002400000 - 000002C00000], size: 000000800000
Partition: RECOVERY, [000002C00000 - 000003400000], size: 000000800000
Partition: CACHE, [000003400000 - 00000FC00000], size: 00000C800000
Partition: MODEM, [00000FC00000 - 000010C00000], size: 000001000000
Partition: FACTORYFS, [0000C6000000 - 0000FB400000], size: 000035400000
Partition: DATAFS, [0000FB400000 - 00017B400000], size: 000080000000
Partition: UMS, [00017B400000 - 00038B000000], size: 00020FC00000
Partition: HIDDEN, [00038B000000 - 0003AB000000], size: 000020000000
GPT header successfully parsed
Get firmware version
Brand = samsung
Manufacturer = samsung
Model = GT-N7000
Phone platform = exynos4
CPU Abi = armeabi-v7a
Android release = 4.1.2
Firmware version = JZO54K.N7000DXLSE
Firmware date = Mon Mar 11 17:14:01 KST 2013
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment